ProtoFlyte

CNC

NEW BRANDSMALL BRAND
(5)
Distance Driver
Where to buy Compare similar discs View flight matrix
Compare similar discs

The CNC is a distance driver from ProtoFlyte, with no flight numbers published by the brand or listed on this site yet.

ProtoFlyte says it machines its discs on a lathe from cured, injection-molded blanks, which it says gives tighter tolerances and more run-to-run consistency than molding alone, and gives its standard rim a slight inversion. It calls the CNC a long-distance, predictable driver with moderate to high stability, a description that suggests it is less suited to players seeking turnover lines, and offers plus and minus versions listed separately on this site. The PDGA approved it on 9 November 2023 (23-253). ProtoFlyte's store listed every CNC variant as unavailable in September 2026.

TryDiscs does not yet record a plastic row for it as of September 2026.

Flight

Source: ProtoFlyte
SpeedHow hard the disc must be thrown to fly as designed. Putters are 1 to 3, the fastest drivers 14 and up.
-
GlideHow long the disc stays in the air. More glide means more distance from the same throw.
-
TurnHow much it drifts right early in flight (right-handed backhand). More negative, more drift.
-
FadeHow hard it hooks left as it slows down (right-handed backhand). Higher, stronger hook.
-
StabilityTurn plus fade. Negative drifts right and is easier for beginners. Positive finishes left.Turn + Fade
-

Dimensions

Source: PDGA
DiameterHow wide the disc is, edge to edge. Almost every disc is 21 to 22 cm.
21 cm
HeightHow tall the disc is lying flat. Putters are usually the tallest.
1.8 cm
Rim DepthHow deep the rim is underneath, where your fingers grip. Putters have the deepest rims.
1.1 cm
Rim ThicknessHow wide the rim is. Wider rims make faster discs that need a stronger throw.
2.3 cm
Rim Inside DiameterThe width of the flat middle, inside the rim. Bigger usually means a slower, easier disc.
16.3 cm
Rim Depth/Diameter RatioRim depth as a share of the disc's width. Higher means a deeper rim for its size.
5.2%
Rim ConfigurationA PDGA score for the shape of the edge. Low is sharp, like a driver. High is rounded, like a putter.
29.25
BeadA small ridge under the edge of the rim, mostly on putters. It changes how the disc feels in hand.
No

Stores with Inventory Now

Similar Discs

  • Clash Discs

    Wild Honey

    4.7(77)

    Distance Driver

    Details
    Speed
    12
    Glide
    5
    Turn
    -2
    Fade
    2
    Stability
    0
    Diameter
    21
    Height
    1.8
    Rim depth
    1.1
    Rim Width
    2.3
    Inside rim diameter
    16.4
    Rim diameter ratio
    5.2
    Rim configuration
    27.5
    Bead
    No

  • XCom

    Dra

    1 review

    Distance Driver

    Details
    Speed
    12
    Glide
    5
    Turn
    -1
    Fade
    2
    Stability
    1
    Diameter
    21
    Height
    1.8
    Rim depth
    1.1
    Rim Width
    2.3
    Inside rim diameter
    16.4
    Rim diameter ratio
    5.2
    Rim configuration
    32
    Bead
    No

  • Lone Star Disc

    Bayonet

    4.6(38)

    Distance Driver

    Details
    Speed
    13
    Glide
    5
    Turn
    -2
    Fade
    2
    Stability
    0
    Diameter
    21
    Height
    1.8
    Rim depth
    1.1
    Rim Width
    2.3
    Inside rim diameter
    16.4
    Rim diameter ratio
    5.2
    Rim configuration
    26
    Bead
    No

Videos

Questions

Reviews

5 reviews from 1 store

The ProtoFlyte CNC has only 5 reviews so far, so one opinion can swing the picture. That's why there's no star average yet.

Try Discs adds up reviews from six disc golf stores, so you see what players think across stores, not just at one shop. Reviews are great for spotting proven, popular discs. Take the details with a grain of salt, though: runs, plastics and skill level all change how a disc flies, so your experience may vary.

Compare it with discs you already throw

From 1 store

Ratings and counts come from each store's own customer reviews.